Store

ATTBLIME Technical Data

Browse the specs and instructions for each product. Storage guidelines and safety data are here too.

AB ZERO

AB ZERO

500 ml can, small to medium scan targets, disappears on its own

Scan window
0–1 h
Sublimation time
1–2 h
Coating thickness
Approx. 2.9 µm
Spray distance
Approx. 15–20 cm

Choose it for quick scans of small and medium targets. On painted surfaces and plastics, test a small area first.

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

Features

AB ZERO is the spray for 3D scanning small and medium targets. Cyclododecane forms an even coating that sublimates and disappears over time. The scan window is 0–1 h. Actual times vary with temperature, humidity, and airflow.

  • Cyclododecane-based sublimating coating
  • Even coating for 3D measurement
  • For small and medium scan targets
  • Works with SHC standard and special nozzles

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the protective cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC special nozzle.

  4. 04

    Spray evenly from about 15–20 cm.

  5. 05

    Scan the part. Once the coating has disappeared, there is nothing to wipe off.

  6. 06

    Dispose of empty containers according to local disposal regulations.

Results vary with surface condition and spray method. Temperature, humidity, and airflow also play a part.

Storage and safety

Store at +5–+45 °C. Shelf life at this temperature is 5 years.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Suitable materials

MetalPlasticGlassWoodStoneCeramicTextilePaperMortarPainted surfaces

The same material can react differently depending on the surface finish. Test a small area first.

AB 2

AB 2

500 ml can, small to medium scan targets, disappears on its own

Scan window
1–2 h
Sublimation time
2–4 h
Coating thickness
Approx. 4.4 µm
Spray distance
Approx. 15–20 cm

Choose it for scanning small and medium targets. You can place scanning markers on the coated surface.

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

Features

AB 2 is a 3D scanning spray that temporarily mattes the surface of small and medium targets. The cyclododecane-based coating sublimates and disappears over time. Scanning markers can be placed on the coated surface. The scan window is 1–2 h. Actual times vary with temperature, humidity, and airflow.

  • Cyclododecane-based sublimating coating
  • Even coating for 3D measurement
  • For small and medium scan targets
  • Works with SHC standard and special nozzles

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the protective cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC special nozzle.

  4. 04

    Spray evenly from about 15–20 cm.

  5. 05

    Scan the part. Once the coating has disappeared, there is nothing to wipe off.

  6. 06

    Dispose of empty containers according to local disposal regulations.

Results vary with surface condition and spray method. Temperature, humidity, and airflow also play a part.

Storage and safety

Store at +5–+45 °C. Shelf life at this temperature is 5 years.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Suitable materials

MetalPlasticGlassWoodStoneCeramicTextilePaperMortarPainted surfaces

The same material can react differently depending on the surface finish. Test a small area first.

AB 6

AB 6

500 ml can, medium to large scan targets, disappears on its own

Scan window
2–6 h
Sublimation time
6–24 h
Coating thickness
Approx. 6.9 µm
Spray distance
Approx. 15–20 cm

Choose it for unhurried scans of medium and large targets. After the job, leave it until the coating disappears.

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

Features

AB 6 is the spray for 3D scanning medium and large targets. Cyclododecane forms an even coating on the surface that sublimates and disappears over time. The scan window is 2–6 h. Actual times vary with temperature, humidity, and airflow.

  • Cyclododecane-based sublimating coating
  • Even coating for 3D measurement
  • For medium and large scan targets
  • Works with SHC standard and special nozzles

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the protective cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC special nozzle.

  4. 04

    Spray evenly from about 15–20 cm.

  5. 05

    Scan the part. Once the coating has disappeared, there is nothing to wipe off.

  6. 06

    Dispose of empty containers according to local disposal regulations.

Results vary with surface condition and spray method. Temperature, humidity, and airflow also play a part.

Storage and safety

Store at +5–+45 °C. Shelf life at this temperature is 5 years.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Suitable materials

MetalPlasticGlassWoodStoneCeramicTextilePaperMortarPainted surfaces

The same material can react differently depending on the surface finish. Test a small area first.

AB P gray

AB P

500 ml can, gray, wipe-off

Coating lasts
Until wiped off
Coating thickness
Approx. 5.16 µm
Spray distance
Approx. 15–20 cm

Prepare for repeat scans with a gray coating. Wipe it off with a cloth after the job.

Times and thickness vary with the working environment, surface condition, and spray method.

Features

AB P is a semi-permanent 3D scanning spray that creates a gray coating. Spray it evenly on the surface to prepare for 3D measurement. The coating does not sublimate on its own, so wipe it off with a cloth after the job. If you need a white coating, see AB P(W).

  • Semi-permanent coating that does not sublimate on its own
  • Wipe off with a cloth after scanning
  • Choose the spray pattern with SHC nozzles

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the protective cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC special nozzle.

  4. 04

    Spray evenly from about 15–20 cm.

  5. 05

    Scan the part, then wipe the coating off with a cloth.

  6. 06

    Dispose of empty containers according to local disposal regulations.

Results vary with surface condition and spray method. Temperature, humidity, and airflow also play a part.

Storage and safety

Store at +5–+45 °C. Shelf life at this temperature is 5 years.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Suitable materials

MetalPlasticGlassWoodStoneCeramicTextilePaperMortarPainted surfaces

The same material can react differently depending on the surface finish. Test a small area first.

AB P(W) white

AB P(W)

500 ml can, white, wipe-off

Coating lasts
Until wiped off
Coating thickness
Approx. 5.16 µm
Spray distance
Approx. 15–20 cm

Choose it for repeat scans that need a white coating. No waiting for sublimation: wipe it off after the job.

Times and thickness vary with the working environment, surface condition, and spray method.

Features

AB P(W) is a semi-permanent 3D scanning spray that creates a white coating. Spray it evenly on the surface to prepare for 3D measurement. The coating does not sublimate on its own, so wipe it off with a cloth after the job. If you need a gray coating, see AB P.

  • Semi-permanent coating that does not sublimate on its own
  • Wipe off with a cloth after scanning
  • Choose the spray pattern with SHC nozzles

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the protective cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC special nozzle.

  4. 04

    Spray evenly from about 15–20 cm.

  5. 05

    Scan the part, then wipe the coating off with a cloth.

  6. 06

    Dispose of empty containers according to local disposal regulations.

Results vary with surface condition and spray method. Temperature, humidity, and airflow also play a part.

Storage and safety

Store at +5–+45 °C. Shelf life at this temperature is 5 years.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Suitable materials

MetalPlasticGlassWoodStoneCeramicTextilePaperMortarPainted surfaces

The same material can react differently depending on the surface finish. Test a small area first.

AB 6G

AB 6G

1 L refill container for spray equipment

A 1 L refill container you fill into spray equipment. Spray to suit your working area and equipment.

Features

AB 6G is a refill product you fill into an airbrush, spray gun, or similar equipment. The size sold in Korea is 1 L. Use it according to your spray equipment's manual.

  • Refill container for spray equipment
  • Sold in Korea in 1 L
  • For airbrushes, spray guns, and similar equipment

Steps

  1. 01

    Check the specifications of the spray equipment and nozzle you will use.

  2. 02

    Set up according to the spray equipment's manual.

Follow your equipment's manual for spray pressure and distance.

Storage and safety

Follow the product label for storage conditions.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Suitable materials

TextileWoodGlassPainted surfacesMetalPlasticStoneMortarPaper

The same material can react differently depending on the surface finish. Test a small area first.

AB 6 PRO

AB 6 PRO

400 ml can, sublimating PRO spray

Scan window
2–6 h
Sublimation time
6–24 h
Coating thickness
Approx. 5 µm
Spray distance
Approx. 5–15 cm

Want to skip wiping off the coating? Choose the sublimating PRO.

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

Features

ATTBLIME's top-tier sublimating spray, built with the user in mind. Spray, scan, and the coating disappears on its own. Even as a non-flammable aerosol, it is a pressurized container, so keep it away from heat and open flames and follow the storage guidelines.

Why AB 6 PRO is the top tier

  • Formulated with the user in mindA non-flammable propellant replaces propane and butane, and the solvent is solketal, which has a high flash point. According to the safety data sheet, the formulation carries no eye-irritation or drowsiness hazard statements.
  • No wiping neededThe coating disappears on its own over time. Skip the work of wiping it off.
  • Thin, even coatingSprays evenly to form a thin coating on the surface you scan.
  • PRO for high-precision measurementThe top-tier sublimating spray made for optical 3D measurement and surface inspection.
  • For many surfacesUse it on metal, glass, painted surfaces, and more.
  • SHC nozzle compatibleChange the nozzle and the spray pattern changes. From wide surfaces to narrow gaps, all with one can.
  • Storage and handlingIt is a pressurized container: keep it away from heat and open flames and follow the storage instructions.

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC nozzle.

  4. 04

    Spray evenly at the spray distance given in the product specs.

  5. 05

    Scan the part.

Temperature, humidity, airflow, and surface condition affect how long the coating lasts and its sublimation time.

Storage and safety

Follow the product label for storage conditions.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

AB P PRO

AB P PRO

400 ml can, white, wipe-off PRO coating after scanning

Coating lasts
Until wiped off
Coating thickness
Approx. 5 µm
Spray distance
Approx. 5–15 cm

Keep repeat measurements going with a white coating that does not sublimate.

Times and thickness vary with the working environment, surface condition, and spray method.

Features

ATTBLIME's top-tier white coating, built with the user in mind. It stays until you wipe it off, so measure as many times as you need without watching the clock. Even as a non-flammable aerosol, it is a pressurized container, so keep it away from heat and open flames and follow the storage guidelines.

Why AB P PRO is the top tier

  • Formulated with the user in mindA non-flammable propellant replaces propane and butane, and the solvent is solketal, which has a high flash point. According to the safety data sheet, the formulation carries no eye-irritation or drowsiness hazard statements.
  • Coating for repeat measurementIt does not sublimate; it stays on the surface so you can scan again and again.
  • Crisp white coatingThe white matte coating picks up the scan pattern sharply.
  • Wipe off after the jobWhen you are done, wipe it off with a cloth.
  • For many surfacesUse it on porous and non-porous surfaces. Test a small area first.
  • SHC nozzle compatibleAdjust spray angle and coating thickness with the nozzle.
  • Storage and handlingIt is a pressurized container: keep it away from heat and open flames and follow the storage instructions.

Steps

  1. 01

    Shake the can well before use.

  2. 02

    Remove the cap and check the spray direction.

  3. 03

    Attach the standard nozzle or an SHC nozzle.

  4. 04

    Spray evenly at the spray distance given in the product specs.

  5. 05

    Scan the part.

  6. 06

    After scanning, wipe the coating off with a cloth.

Unlike sublimating products, this coating is wiped off.

Storage and safety

Follow the product label for storage conditions.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

µScan liquid

µScan liquid

10 ml with built-in brush, a coating you brush onto small areas

Coating thickness
Up to 3 µm

Coating thickness varies with surface condition, application method, and the amount used.

Features

A liquid matte coating you apply where needed with the brush in the cap. Use it for partial coating of small objects such as dental, jewelry, and electronic parts.

Steps

  1. 01

    Apply the coating to the area you will scan with the brush in the cap.

  2. 02

    After scanning, remove the coating in a way that suits the material.

This product is brushed onto the areas you need. Spray distances do not apply.

Storage and safety

Follow the product label for storage conditions.

Safety information is on the product label and in the Safety Data Sheet (SDS). Read it before use.

Remember these five points and anyone can use it with ease.

Nozzles and the SHC system

SHC is a system for swapping the can's spray head. The nozzle sets the spray direction and width. Choose the nozzle that suits what you are scanning.

Spray mist spreading in a circle
Round nozzleRound spray
Spray mist spreading in a fan
Variable swivel nozzleSwitches between vertical and horizontal
Round nozzle diagram
Round nozzleSprays a round pattern for fine details. On sublimating products, a thinner coat disappears faster.
Variable swivel nozzle diagram
Variable swivel nozzleSwitches the spray direction between vertical and horizontal. Use it to coat wide surfaces evenly.
Extension nozzle diagram
Extension nozzleReaches hard-to-access areas with an extension tube.

SHC nozzles attach to can products. The AB 6G refill uses your spray equipment's nozzle.

The full ATTBLIME lineup.

Explore ATTBLIME's other products to match the work you need. To buy, send us the product name and quantity through Contact. We will let you know whether we can supply it.

Cans

AB 12

AB 12

500 ml can, sublimating, for long scanning jobs

A sublimating spray for long scans of medium and large parts. A blend of several sublimating ingredients creates a temporary matte surface.

Scan window
6–12 h
Sublimation time
12–24 h
Coating thickness
Approx. 2–6 µm
Spray distance
Approx. 15–20 cm

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

AB C clear

AB C clear

500 ml can, transparent, a clear coating that keeps the part's color visible

A transparent sublimating spray for scanning while you see the part's original color. It does not cover it in white.

Scan window
2–6 h
Sublimation time
6–12 h
Coating thickness
Approx. 10 µm
Spray distance
Approx. 15–20 cm

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

AB X

AB X

500 ml can, white, sublimating with visible white coverage as you spray

A sublimating spray whose white matte coating is visible as you apply it. For small and medium parts and dental scanning.

Scan window
Up to 2 h
Coating thickness
Approx. 5 µm
Spray distance
Approx. 15–20 cm

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

AB 24

AB 24

Can, for restoration work and long-term surface preparation

A cyclododecane-based spray for temporarily protecting surfaces or preparing them for 3D measurement in archaeology and restoration work.

Scan window
12–24 h
Sublimation time
24–48 h
Coating thickness
Approx. 32–36 µm
Spray distance
Approx. 15–20 cm

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

Refill container for spray equipment

AB ECO GREY

AB ECO

  • 1 L refill container, gray
  • 1 L refill container, white

A water-based matte coating you fill into spray equipment. Available in gray and white; wipe it off after scanning.

Coating thickness
Airbrush application: approx. 3.95 µm / Powered spray system application: approx. 8.07 µm

Times and thickness vary with the working environment, surface condition, and spray method.

AB 2G 1 L

AB 2G

Refill container for spray equipment

  • 1 L refill container
  • 5 L refill container

A refill coating you fill into an airbrush or spray gun. Coating results vary with the equipment and application method.

AB 6G 5 L

AB 6G 5 L

5 L refill container for spray equipment

The 1 L refill container is sold in Korea.

A refill coating you fill into an airbrush or spray gun. Coating results vary with the equipment and application method.

AB PG GREY 1 L

AB PG

  • 1 L refill container, gray
  • 5 L refill container, gray
  • 1 L refill container, white
  • 5 L refill container, white

A coating you fill into spray equipment. Available in gray and white; wipe it off after scanning.

AB XG 1 L

AB XG

1 L refill container, white, sublimating white coating for spray equipment

AB XG is a refill sublimating coating you fill into spray equipment. Use it when small to medium parts need a white matte coating.

Scan window
Up to 2 h
Sublimation time
2–4 h

The scan window is how long the coated surface can be measured. Sublimation time is how long the coating takes to disappear. Times and thickness vary with the working environment, surface condition, and spray method.

Spray equipment and nozzles

Equipment for spraying refill coatings, plus SHC nozzles.

Portable airbrush system
Portable airbrush systemA battery compressor and airbrush for applying refill coatings.
Battery spray system
Battery spray systemBattery-powered equipment that sprays refill coatings without a compressed-air connection.
Gravity-feed air spray gun
Gravity-feed air spray gunRuns on compressed air with adjustable flow and spray width.
Powered spray system
Powered spray systemMains-powered equipment that sprays refill coatings without an external compressed-air connection.
Spare cup for battery sprayer
Spare cup for battery sprayerA spare container for the sprayer, with lid and sealing parts.
Extension nozzle (SHC Dental Spray Head)
Extension nozzle (SHC Dental Spray Head)A nozzle with an extension tube for spraying inner contours and hard-to-reach areas.
Variable swivel nozzle (SHC Variable Spray Head)
Variable swivel nozzle (SHC Variable Spray Head)Turn the head to spray vertically or horizontally.

Glossary

3D scanning spray
A spray applied to the surface before 3D scanning to create a thin matte surface the scanner reads easily.
Sublimating
Products whose coating turns from solid straight into gas and disappears on its own over time. AB ZERO, AB 2, AB 6 and AB 6 PRO belong to this group.
Semi-permanent
Products whose coating does not disappear on its own and stays until you wipe it off with a cloth. AB P, AB P(W) and AB P PRO belong to this group.
Scan window
The time during which the coated surface can be measured with the scanner. It is the basis for planning your work.
Sublimation time
The time it takes for the coating to disappear completely. It depends on temperature, humidity, airflow and how much you sprayed.
Coating thickness
The thickness of the coating on the surface. The scanner reads the outer face of the coating, so the thinner it is, the smaller its effect on dimensions.
Scan pattern
The pattern of light a structured-light scanner projects onto the surface to read the shape of the object.
Reference markers
Small markers attached to the object so the scanner can align its position.
SHC nozzles
A system of interchangeable spray heads for the can that lets you select spray direction and width. Round, variable swivel and extension nozzles are available.
Refill container
A product you fill into spray equipment such as an airbrush or spray gun instead of using a can. AB 6G comes in a 1 L container.
Non-flammable aerosol
An aerosol not classified as flammable. AB 6 PRO and AB P PRO belong to this group; please still follow the precautions for pressurized containers.